Refinishing A Wooden Boat Hull

refinishing a wooden boat hull

To restore your boat’s luster, it may be possible to get away with a refinish. but keep in mind for older boats, a repainting might be in order as well. tips for dealing with fiberglass. refinishing your fiberglass boat means working primarily with fiberglass. here are a few tidbits you’ll need to know:. Refinish your wooden boat. 1. using steel wool, vigorously scrape off peeling or flaked wood from the wooden parts of the boat. this should also work to remove mold buildup. 2. give the boat a good sanding using a belt or orbit sander loaded with medium-grit sandpaper, and then sand it again with very-fine-grit sandpaper for an even smoother. Wood isn’t simple like plastic. it’s full of complications and potential for further damage if it springs a leak. we don’t have to tell you just how damaging a leak in a wooden boat hull can be. fortunately, you don’t have to accept a leak as fatal. just remember the following tips for wooden boat hull repair..

Product

1957 lyman 13’ – old time world

refinishing a wooden boat hull On the outside of my wood strip canoe i rolled a couple more coats of clear epoxy on a few subtle low spots, let it cure, long boarded it and applied a coat of two-part polyurethane clear. for 28 years the boat looked great. a few years ago i decided to refinish the hull bottom with a couple coats of z-spar captain’s